Potash Crushing Equipment

Why Gundlach Roll Crushers, Cage Mills and Roll Mills are the preferred size reduction equipment for Potash

Gundlach Crushers have been sizing Potash in New Mexico and across Canada since 1967. As a respected leader and reliable supplier for sizing potash, Gundlach has earned a position as the first choice among the world's leading engineering firms. So when world demand for potash boomed in 1997, Gundlach was their manufacturer of choice to test for the optimum crushing solutions at new potash mines.

Gundlach Crushers size potash ore on the wet side of the production process and size potash product on the compaction side of the plant. Gundlach's application knowledge and precision three dimensional crushers helped mines ramp up their output, while providing precise product size, maximized yield and minimum fines generation. Four models of Gundlach Crushers are used in sizing potash: the 4000 Series Roll Crusher for raw ore, the 2000 Roll Crusher Series for breaking flake from the compactor, the Cage-Paktor cage mill for polishing oversize material from the screens, and the Nanosiz-R roll mill, which is also used for polishing oversize material discharged from the screens.

Download Gundlach Potash Brochure - PDF (requires registration)

Roll Crusher for Potash Raw Ore

4000 Series Roll Crusher: Single-Stage or Two-Stage

The Gundlach 4000 Series Roll Crushers demonstrate their superiority in sizing potash ore by producing high product uniformity with fewer fines.

Single-stage, two roll and two-stage, four roll crushers are employed in crushing potash ore. Rolls are available in 24" (610mm) and 30" (762mm) diameter with roll face up to 100" (2540mm) wide.

4000 Series Roll Crusher Features and Benefits

Lower operating and maintenance costs
More saleable and profitable crushed products
Dependable on-stream reliability
Engineered for ease of maintenance
Flexible machine configurations for maximum control of product size
Nitroil^®adjustment & relief system allows changes of output size during operation

Roll crusher for Breaking Flake from Potash Compactor

2000 Series Roll Crusher: Single-Stage or Two-Stage

The 2000 Series Roll Crushers are excellent for breaking potash flake from the compactor. This roll crusher not only breaks the potash flake but also sizes it.

Single-stage, two roll and two-stage, four roll crushers are used in breaking flake from the potash compactor. The 2000 Series crushers are available with 13-15" diameter rolls (330mm to 380mm) and roll face up to 60" (1525mm) wide

2000 Series Roll Crusher Features and Benefits

Dozens of Roll Designs are available to meet your potash-crushing needs
Low horsepower per ton ratio means low power requirements & less operational cost
Adjustment system allows changes of output size during operation
Dual-bulkhead lubrication system puts grease fittings into two convenient locations
Machine configuration gives the best control of product oversize
Rolls are coupling mounted and can be replaced in hours

Cage Mill Crusher for Sizing Oversize Potash Material Discharged from Screens

Cage-Paktor^® 1C3R Cage Mill

The Cage-Paktor cage mill is used for polishing and sizing oversize material coming from the potash screens.

Gundlach's Cage-Paktor is the only cage mill with all the drives on one side, allowing easy access to the cages. This is just one example of the maintenance-friendly designs that are engineered into every Gundlach crusher.

Cage-Paktor Cage Mill Features and Benefits

Sizes 100 mm feeds to 2 mm product
Horsepower is required in direct proportion to the work required
The striking plate maintains desired product size during the life of the plate
Shaft-within-a-shaft design make it compact, taking up less floor space
Replaceable wrap-around striking plates offer increased tonnage life & wear protection
Swing away door gives immediate access without the need to remove components
An optional on-board cage jack allows cage removal without the need of overhead cranes or extra help

Download Cage-Paktor Brochure - PDF requires registration

Roll Mill Crusher for Polishing/Glazing and Sizing Oversize Potash Material Discharged from Screens

Nanosiz-R^® Roll Mill

The Nanosiz-R Roll Mill offers Bi-Modal (shear & compression) crushing performance.

Like the cage mill it is used for polishing oversize material coming from the potash screens.

Nanosiz-R Roll Mill Features and Benefits

High tonnage crushing capacity - up to 40 tons per hour
Low capital and energy costs
Small footprint compared to other equipment, fits in small spaces
Multiple units can be used in a series to achieve greater reduction ratios
Built of heavy duty steel construction and alloyed iron rolls

Download Nanosizr-r Brochure - PDF requires registration

访问开创K-Tron集团其他网站:

K-Tron 喂料机 | K-Tron primier | 宾夕法尼亚破碎机 | Jeffery Rader | K-Tron 国际

刚迪拉克设备公司 Gundlach Equipment Corporation
One Freedom Drive, Belleville, Illinois 62226 USA
电话: 618-233-7208 | 传真: 618-641-6974